Use Bluetooth mode to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod
or other Bluetooth device.
1. Press and hold the
Button
to turn on the unit in Bluetooth mode. The
Button
light will
flash as the unit searches for a previously paired device, then turn solid when a previously
paired device is detected. (If unit is already ON, press the
Mode Button
to toggle the unit
between iPod/Aux-in audio mode and Bluetooth mode (the
Button
is lit in Bluetooth mode).
2. Press and release the
Play/Pause/Pairing Button
to play or pause audio from your
Bluetooth device.
NOTE
: Play/Pause only controls connected Bluetooth or docked iPad, iPhone or iPod devices.
It does not control aux line-in devices.
3. Use the
/
- Buttons
to adjust volume.
4. When done listening, press and hold the
Button
for 2 seconds to turn the unit off.
You can use the unit as a speakerphone for a linked Bluetooth-capable phone during an incoming or
active call. To make a call, dial your phone as usual. To redial the last number called (on phones that
support the feature), press the
Button
on the unit twice.
1. The
Button
will flash red and the
Button
will flash green during an incoming call. When a
call is received, playing music is muted to hear the ring tone.
2. Press the
Button
to answer the call, or press the
Button
to ignore it. Use the same controls for
call waiting: press the
Button
to answer and switch between calls, or press the
Button
to
ignore a new call.
3. Use the
/
- Buttons
to adjust speaker volume.
4. When the call is completed, press the
Button
to end the call and resume previous function.
Playing Audio Via Bluetooth
Using the Speakerphone
6
