U S I N G B L U E T O O T H
Pairing Your Device
1.
Press and hold
the
Bluetooth Pairing Button
located on the front of the unit
for 3 seconds. The Bluetooth icon will flash & "BTPAIR" icon light on the
display and a voice prompt will announce "PAIRING".
2. “iHome iBTW450” will appear on your device’s Bluetooth menu. Select
“iHome iBTW450” to complete pairing. If prompted for a passcode, enter
“1234” on your device’s keypad. “Connected” or similar should appear on
your device.
3. A voice prompt will announce "CONNECTED" and the Bluetooth icon will
appear solid indicating the iBTW450 is paired and ready to play music. If no
device is successfully paired within 3 minutes the unit will default to previous
mode.
4. Once the unit is paired to a device and in Bluetooth mode it will attempt to
autolink when the device is within range (about 33 feet).
Listening to Bluetooth Audio
1. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle through BT and AUX modes.
2. Press the
Play/Pause
Button
to pause Bluetooth audio, and again to
unpause.
3. When BT mode is selected, press the
+
or
– Buttons
to navigate to the
desired
tracks.
Adjust the volume on your BT device to maximum output.
4.
Press the or
Button
on the unit to adjust the system volume.
To reset Bluetoth,
press and hold
the
Bluetooth Pairing Button
for 10 seconds.
9