Charging the Unit
CHARGE UNIT BEFORE USE
1. Connect the micro USB plug to the micro USB charging port on the back of the unit.
2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB
charging device. For first time use, charge unit for about
8 hours.
3.
The Battery Level Meter on the front of the unit flashes while the unit is charging
and turns solid
once the unit is fully charged. See table above for charge status information.
5
Using the
Go+ Arc
P6
NOTE: The white, 4 segment Battery Level Meter on the front of the unit is activated when the unit
is ON or when connected to a charging source via the USB cable.
iHome Go+ Arc USB port
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer connected
to working outlet
Computer USB port
USB AC adaptor (included)
Battery Charge Status
100% charged
dead, needs charge
low, needs charge
60 - 99% charged
46 - 60% charged
