background image

Go+ Arc

FCC Information

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

P14

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 

This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: 

(1)  This device may not cause interference and   

(2)  This device must accept any interference received, including interference that may cause undesired operation

•  Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate 

the equipment.

•  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

IC Statement

 

This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, 

and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux 

conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique 

subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can 

obtain Canadian information on RF exposure and compliance. 

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 

rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

FCC ID:EMOIBT33

   IC:986B-IBT33

13

02/03/2015

Содержание iBT34 Go+ Arc

















Отзывы: