iBT18
Using the
Setting and Using the Alarms
6
This unit features dual alarms which can be set to different times and alarm sources. Each is set in the same
way. Instructions are given as “Alarm Button”; use
Alarm 1 Button
or
Alarm 2 Button
to set respective
alarms. Alarm will sound for 1 hour until reset
Note
: each step must be completed while display is flashing or step will time-out with any changes saved.
1. Press and hold the
Alarm Button
for 2 seconds until the alarm time display and alarm icon flash.
2. Press the
–
or
+
Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time.
3. Press the
Alarm Button
to confirm the alarm time setting. The
alarm schedule
will flash.
4. Press the
–
or
+
Buttons
to set the alarm schedule (‘7 DAYS’ = the whole week, ‘5 DAYS’ = Monday
through Friday, ‘2 DAYS’ = Saturday and Sunday only).
5. Press the
Alarm Button
to confirm the alarm schedule setting. The
wake-to source
will flash.
6. Press the
–
or
+
Buttons
to select the desired wake to alarm source: Bluetooth or tone. The selected
wake-up source will flash in the lower part of the display.
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device is detected, the
alarm will default to Tone.
Wake to Tone
: Press the
Alarm Button
to confirm. Press the
–
or
+
Buttons
as needed to listen to
and to select one of the four built-in wake-to tones (1 - 4).
7. Press the
Alarm Button
to confirm the alarm source. The volume display will flash.
(Continued on page 7)
