iHome HiH66, Руководство пользователя

Страница: 9 / 10

Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the iPod original sound source (MP3) is old or of poor quality, distortion
and noise are easily noticed with high-power speakers. Try a different
audio source such as a music CD.
If you are using an external sound source like older generation of iPod
or iPod Shuffle, try reducing the output volume on the device itself. Also
try turning bass boost OFF.
7
Troubleshooting
Solution
Symptom
Possible Problem
Unit/adaptor gets warm
after extended play at
high volume This is normal Turn unit off for awhile or lower volume
The signal from the line out jack needs amplification. Use powered
speakers/monitors or other amplified audio device. Can't hear
headphones/speakers
attached to line out jack Line out jack is not meant for headphones.
Speakers need a power source
Clock reset/changed
times Electrostatic charge from line-in cord Store the end of the line-in cord properly away in provided plug holder
on back of unit when not in use. Adjust clock to proper time.
NOTE: When not in use, attached line-in cord plug must be stored in plug holder on rear of
unit to avoid improper operation.