Before starting your first cleaning cycle please clear the floor of all objects other than furniture as some small objects may obstruct, get caught in, or damage
the iHome Autovac Orbita Pro.
FIRST CLEANING
Simply press the Power button on your Orbita Pro to begin an Auto-Clean cycle of your home. Orbita Pro will start cleaning and will continue until it has
covered the entire cleaning area. Once cleaning is finished, the Orbita Pro will automatically return back to the Auto Empty Base to empty the dustbin.
CLEANING MODES
Auto Clean -
The Orbita Pro will automatically clean your floor until it has covered the entire surface. Once cleaning is finished the Orbita Pro will automatically
return back to the Auto Empty Base to empty the dustbin and re-charge.
Area Clean -
Draw customizable areas in your floor-plan within the iHome Clean App. The Orbita Pro can then be sent to your desired Area.
Spot Clean -
The Orbita Pro will deep clean a specific spot. First, use the manual navigation control to guide your Orbita Pro to the desired location. Then,
choose Spot Clean mode for a deep clean.
Powermop Scrub -
Fill the water tank and connect the Powermop Scrub attachment. Orbita Pro will automatically mop and vacuum your floor area. Use the
iHome Clean app to specify your desired mop areas and preferences.
Manual Control -
Using the navigational D-Pad on the remote control (or in the iHome Clean App) you can manually control where the Orbita Pro goes to clean.
13
USING YOUR AUTOVAC
