Plug the power cable into a functioning wall outlet.
Conveniently store parts and remote control as shown.
Position the Auto Empty Base on the Parking Plate as shown.
The four guide tabs on the parking plate will help align placement.
NOTE:
The Auto Empty Base must always remain connected to power.
Avoid using a power source that may inadvertently be switched off
(e.g. power strip, outlet controlled by a light switch, GFCI).
1:
Remote.
2:
Extra HEPA Filter
3:
Cleaning Tool.
4:
Extra Side Brush.
5:
Cord Wrap.
1
2
3
4
5
Plug the power cable into the back panel of the Auto Empty base. Wind
extra cable slack around the cord management system.
4
6
3
5
10
SETTING UP THE AUTO EMPTY BASE
