Before starting your first cleaning cycle please clear the floor of all objects other than furniture as some small objects may obstruct, get caught in, or damage
the iHome Autovac Eclipse Pro.
FIRST CLEANING
Simply press the Power button on your Eclipse Pro to begin an Auto-Clean cycle of your home. Eclipse Pro will start cleaning and will continue until it has
covered the entire cleaning area. Once cleaning is finished, the Eclipse Pro will automatically return back to the Auto Empty Base to empty the dustbin.
CLEANING MODES
Auto Clean -
The Eclipse Pro will automatically clean your floor until it has covered the entire surface. Once cleaning is finished the Eclipse Pro will automatically
return back to the Auto Empty Base to empty the dustbin and re-charge
Powermop Scrub -
Fill the water tank and connect the Powermop Scrub attachment. Eclipse will automatically mop and vacuum your floor area. If you prefer
mopping only, use the iHome Clean App to turn off vacuum suction during a Powermop cycle.
Manual Control -
Using the navigational D-Pad on
the
remote control (or in the iHome Clean App) you can manually control where the Eclipse Pro goes to clean.
Spot Clean -
The Eclipse Pro will deep clean a specific spot. First, use the manual navigation control to guide your Eclipse Pro to the desired location. Then,
choose Spot Clean mode for a deep clean.
13
USING YOUR AUTOVAC
