IHI Shibaura G-EXE22-OMEGA-C11, Руководство оператора, Страница: 77 / 106

Work roller clutch knob
Normal
(clockwise direction)
Reverse (counterclockwise
direction)
Release
Throttle lever
■ Operation prior to mowing
!
In order to perform grass cutting work with the mower, it is necessary to engage the blade clutch and the
work roller clutch.
!
The blade clutch turns the blades for cutting grass.
!
The work roller clutch turns the work roller.
!
The blades and work roller begin to turn after both of these clutches are engaged and then the main clutch
is engaged.
〈Engaging the work roller clutch〉
!
Engage the work roller clutch before engaging the blade clutch.
1. When you arrive at the workplace, first find an area of
level, soft ground near the grass where you can remove
the tires.
2. When you are ready to start grass cutting work, install the
bucket, and then before starting the engine confirm that
the main clutch is not engaged, and that there are no peo-
ple 5m in front of you or 3m behind and to either side of
you.
!
Move the ▽ mark on the throttle lever to the "L" position.
3. Make sure that the mower does not begin to move for-
ward even if the brakes are not engaged. Push the work
roller clutch from the right side until it stops.
!
If you press this clutch until it stops, it will be in the "Nor-
mal (clockwise)" position. If you pull it back one position, it
will be in the "Released" position. If you pull it back one
more position, it will be in the "Reverse (counterclockwise)"
position.
Warning
!
Be sure to operate the work roller clutch know
and the shift know from the side of the mower.
!
Be sure to install the bucket before operating
the clutches and starting grass cutting work.
Operation
23