To avoid damage as a result of battery leakage, remove the
batteries if the Scale is not going to be used for 3 months or more.
The Scale and batteries must be disposed of according to
local regulations at the end of their service life.
Select a weight unit by adjusting the switch under the
battery cover.
The Wireless Scale is now ready for use.
STEP 1: Turn on the iHealth Wireless Scale by stepping on it until
“0.0”is displayed.
STEP 2: Turn the Bluetooth Setting “On” on your mobile device.
The device will start searching for the Scale. (Note: it may
take up to 30 seconds for the device to detect the
Bluetooth signal).
STEP 3: Wait until the model name, “iHealth HS3xxxxx”, and “Not
Paired” appear on the device screen. Select the model
name “iHealth HS3xxxxx” to pair and connect. If
connection is successful, "Connected" appears on the
device screen.
Select Weight Unit
SET UP
BLUETOOTH
CONNECTION
!
st lb kg
3
