The scale displays
"EE"
There are fluctuations
in the results
The APP displays
"Timeout" when
uploading
The communication
between the iOS
device failed.
Every time the scale is
moved, it must be
recalibrated.
The Bluetooth
connection is
interrupted.
Pair the iOS device
with the scale.
a) Place the scale on a hard and flat
surface, b) tap on the scale with your
foot to turn on the scale and c) the
scale is now calibrated.
Be sure Bluetooth is connected and
upload again.
EXPLANATION OF SYMBOLS
Symbol for “CAUTION”
!
Symbol for“ENVIRONMENT PROTECTION – Waste
electrical products should not be disposed of with house-
hold waste. Please recycle where facilities exist. Check
with your local Authority or retailer for recycling advice”.
Symbol for “THE OWNER’S MANUAL MUST BE READ”
Symbol for “TYPE BF APPLIED PARTS”
8
1. Avoid high temperatures and direct sunlight. Do not immerse
the Scale in water, as this will damage the Scale.
2. If the Scale is stored in near freezing or freezing temperatures,
allow it to acclimatize to room temperature before use.
3. Do not attempt to disassemble the Scale.
4. Remove the batteries if the Scale is not going to be used for
more than 3 months.
5. Clean the Scale with a soft damp cloth if dirty. Do not use
abrasive or solvent-based cleaners.
6. The Scale is essentially maintenance-free and requires no user
intervention.
7. The Scale will maintain its safety and performance features for
at least 10,000 measurements or two years of use.
CARE AND MAINTENANCE
