9 / 27
confirm your test strip type first. And then following the instruction below according the
test strip type.
Test strip type is EGS-2003.
About the first time test.
We recommend you finish the first time test through online mode showing below from
PROCESS 1
to PROCESS 5
.
But you can also finish the first time test through offline mode (only following
PROCESS 5
).
About the general time test.
After you have finished the first time test, you can finish test through online mode (launch your
app and then only following
PROCESS 5
).
But you can also finish test through offline mode (only following
PROCESS 5
)
.
•
PROCESS 1
Download the companion app
Prior to first use, download and install the free Gluco-Smart App from the App Store or Google Play Store
to your mobile device.
•
PROCESS 2
Login in your app
Create an iHealth ID first, and then you can login your app.
Note2: You can create an iHealth ID by following instructions in your app, or go to
www.ihealthlabs.com
to
create
.
•
PROCESS 3
Activate your meter
Your meter is powered by a built-in, rechargeable battery. When you use this meter first time, activate it as
following instruct. Plug one end of the charging cable into the side of the meter and the other end into your
computer’s USB port.
Note 3: About Low battery message
After you have used your meter for some time,
appears for three seconds when the battery
in your meter is low on power. You must recharge the battery before using it again.
Important: If battery is completely drained, fully charge the battery.
•
PROCESS 4
Confirm your test strip model
Keeping your meter is closed to your Android or iOS mobile device within 30cm. And then launch your app
and select the “No Coding” model.
Note 4: •If you want to change the other strip model, you can re-choose anytime in setting pages.
•
Must re-confirm your test strip model, once you have changed the model of test strip into the other
one.
