iGuzzini BZX1, Руководство пользователя

Страница: 48 / 89

Protective Cover
保
护盖
Element Function
“LED product” connector
Connector for plugging the USB Pen into the special compartment in the LED product
“T1” button
- Long pressure (about 3 seconds) :
“Download” (data transfer from USB Pen to LED
product)
- -
Press and hold simultaneously with T2: “Upload” (data transfer from LED product to
USB Pen)
“T2” button
- -
Press and release: “Test” (changes the light intensity emitted by the LED product)
- -
Press and hold simultaneously with T1: “Upload” (data transfer from LED product to
USB Pen)
“USB” connector
Type B Mini-USB connector for connection to PC
“Link/OK” LED
Green LED:
- Flashing, if the flash drive is powered but not connected to a PC or Led Driver;
With fixed light once the connection to the PC has been established through either
the LED Street Lamp or SW;
“Data” LED
Yellow LED, flashes when data is sent to the USB Pen or from the Pen to the
PC/LED product
“Error” LED
The red LED lights up when an error occurs. If the USB Pen is battery-powered and
the battery voltage is not enough, the red LED will start flashing.
Protective Cover
Covers and protects the “LED product” connector
元件 功能
“LED
产品
”
连接器 用于将
USB Pen
插入
LED
产品中专用插座的连接器
“T1” 按
钮
-
长按
（大
约
3
秒）：
“
下
载
”
（从
USB
笔
传输数据到
LED
路灯）
- -
与
T2
同
时按下并保持：
“ 上
载
” （数据从
LED
产品传输至
USB Pen
）
“T2” 按
钮
- -
按下并
释放：
“
测试
”
（改
变
LED
产品发射的光强）
- -
与
T1
同
时按下并保持：
“ 上
载
” （数据从
LED
产品传输至
USB Pen
）
“USB”
连接器
Type B Mini-USB
连接器，用于连接
PC
“Link/OK” LED
绿色发光二极管：
-
闪烁（如果闪存驱动器通电但未被连接到电脑或
LED
驱动器的话）；
有固定灯光（一旦通
过
LED
路灯或者
软件与电脑建立了连接）；
“ 数据 ”LED
黄色
LED
，在数据
发送至
USB Pen
，或者数据从
Pen
发送至
PC/LED
产品时闪烁