igus i.Sense EC.P, Руководство пользователя

Страница: 11 / 37

Sensor messages
11/14
Manual i.Sense EC.P- V 1.1
5.1.2 Set date and time
Date and time can be set in values.txt.
5.2 Calibration
- Push and hold RESET button
- Turn offset-potentiometer until yellow LED flashs
- Red LED flashs: force limit too high
- Green LED flashs: force limit too low
- Push RESET button again, calibration finished
Visual shown on p.11 of Assembly instruction .
Offset can also bechanged by terminalprogram, OFFSET potentiometer has to be turned until force is 0 .
6 Sensor messages
The metrics are stored 18 times per minute as CSV-file on SD-card. A new file is generated after eight hours and when turning
on the module. A maximum of 250 files can be stored, before the circular buffer begins again at file, that file will be overwritten.
6.1 String structure
The sensor messages are given in that form:
IS.EC.P.03…
IS.EC.P.07…
If force is out of adjusted limits, no LED blinks. For calibration it is recommended to use load cells nominal force as force
limits. This can be changed afterwards. (see 5.1.1)
N
OTE
!
Name Format
Date DD.MM.JJJJ;
Time HH:MM:SS;
Upper Force Limit [N] XXXXXX;
Actual Force [N] XXXXXX;
Lower Force Limit [N] XXXXXX;
Name Format
Date DD.MM.JJJJ;
Time HH:MM:SS;
Absolute Upper Force Limit [N] XXXXXX;
Upper Force Limit [N] XXXXXX;
Actual Force [N] XXXXXX;
Lower Force Limit [N] XXXXXX;
Absolute Lower Force Limit [N] XXXXXX;
Number of Upper Force Tolerance Oversteppings XXXXXX;
Number of Lower Force Tolerance Oversteppings XXXXXX;
Number of Force Sampling until Averaging XXXXXX;\ r\n