Crystal Slant Cabinet Overview
2014 IGT. All Rights Reserved.
Page 5 of 32
Confidential – not to be distributed without prior written authorization from IGT. Under no circumstances can this document be copied,
distributed, or used except by the recipient.
All lock locations are designed primarily for “Short Barrel 90 Degree” locks. The primary lower door lock needs to
be a “Left Turn” lock. The other locks are “Right Turn” locks
All Lock Cam required for Crystal Slant are contained within “KIT-C-SLANT, LOCK CAMS” P/N 91485204.
Lock collars are contained in “KIT,HARDWARE,C-SLANT” P/N 91443100.
Temporary shipping locks along with the cams needed for final lock installation are installed at the factory for all
primary lock locations.
Lower Door Lock Options:
o
The lower door was designed for the use of right-hand-turn short barrel locks.
o
Long barrel locks are acceptable for using the appropriate lock collars.
Dual Lock Installation
Single Lock Installation (shown with plastic cover removed)
This is a left turn lock.
80317100
80317101 (90 degree offset)
