Ignition Cobalt X-3 Coupe, Руководство пользователя

Страница: 8 / 32

4. Connections
4.1. Electrical connections
If you wish to change the power supply
mains with the enclosed power cable and plug. The earth has to be connected.
Cable (EU)
Cable (US)
Brown Black
Light blue White
Yellow/Green Green
4.2. DMX connections
To make a DMX512 connection go ahead like it is described in the picture. Make s
shielded cable. 3pole or 5pole XLR cables are suitable.
connector, you will need to use a 5pin to 3 pin
4.3. DMX connection with terminator
Where the DMX cable has to run
environment like a disco for installations
corruption of the digital control signal by electrical
connector with a 120
Ω resistor between pins 2
socket of the last device in the series.
8 / 32
Electrical connections
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
mains with the enclosed power cable and plug. The earth has to be connected.
Cable (US) Pin International
Live L
Neutral N
Earth
To make a DMX512 connection go ahead like it is described in the picture. Make s
3pole or 5pole XLR cables are suitable. If you use a controller with a 5 pin DMX output
use a 5pin to 3 pin adapter.
DMX connection with terminator
cable has to run a long distance or the equipment is operated in an electrically
for installations, we recommend using a DMX terminator.
signal by electrical noise. The DMX terminator is simply an
between pins 2 and 3, which is then plugged into the
in the series. Please look to the bottom drawings.
settings, see the chapter Appendix. Connect the fixture to the
International
To make a DMX512 connection go ahead like it is described in the picture. Make sure that you use
If you use a controller with a 5 pin DMX output
in an electrically noisy
terminator. This prevents
is simply an XLR
the XLR output