Chapter 5
|
System Settings
Maintenance
– 55 –
Rebooting the
Access Point
The Reboot page allows you to reboot the access point.
Figure 35: Rebooting the Access Point
Resetting the
Access Point
The Reset page allows you to reset the access point to the factory defaults. Note
that all user configured information will be lost. You will have to re-enter the
default user name and password to re-gain management access to this device.
Figure 36: Resetting to Defaults
Note:
It is also possible to reboot or reset the access point by inserting a pin in the
pin hole labeled “RESET” on the connector panel of the access point and:
◆
press 2 seconds to reboot the access point;
◆
press 10 seconds to reset the access point to the factory defaults.
Содержание SunSpot AC1200
Страница 10: ...Tables 10...
Страница 20: ...Chapter 1 Introduction Main Menu 20...
Страница 67: ...SkyFire and SunSpot MG JCF141020 R02...