Chapter 4
|
Wireless Settings
VLAN Settings
– 51 –
network must also be tagged with the same VLAN ID. Received traffic that has
an unknown VLAN ID or no VLAN tag is dropped.
◆
When VLAN support is disabled, the access point does not tag traffic passed to
the wired network and ignores the VLAN tags on any received frames.
Note:
Before enabling VLAN tagging on the access point, be sure to configure the
attached network switch port to support tagged VLAN frames for the VLAN IDs
configured on the access point. Otherwise, connectivity to the access point will be
lost when you enable the VLAN feature.
Figure 31: Configuring VLANs
The following items are displayed on this page:
◆
VLAN ID
— A VLAN identifier to be assigned. (Range: 3-4095)
(VLAN 1 and 2 are reserved for internal use.)
◆
Ports
— The Ethernet ports assigned to the specified VLAN.
◆
SSIDs
— The SSID of a VAP configured to be a member of the specified VLAN.
This option is configured under Radio Settings (Network Settings – Network
Behavior).
Содержание SunSpot AC1200
Страница 10: ...Tables 10...
Страница 20: ...Chapter 1 Introduction Main Menu 20...
Страница 67: ...SkyFire and SunSpot MG JCF141020 R02...