background image

ESK03

7

SPECIFICATIONS

ACCESSORY/PART

DETAILS

Model

ESK01

Deck Construction

Maple 

Max Speed

Low Setting

12km/h

Medium Setting

26km/h

High Setting

42km/h

Distance Range

Up to 18km

Rider Weight

Max: 100kg

Dimensions

L970 x W255 x H135mm

Battery

Type

6.6Ah Samsung Cells

Charging Time

~4 Hours

Motor

Type

Belt Drive

Power

1650W*2

Wheel

Material

6 inch silicone or 83mm PU tyres 

(interchangeable)

Size

Dia83 x W52mm

Remote

Distance

14m

Frequency

2.4GHz

Charging Time

2 Hours

Weight

Net Weight

8.8 kg

Gross Weight

11.5 kg

[1] ITEM HEIGHT: 

from the ground to the top of the scooter;

[2] DISTANCE RANGE:

 measured when it is no wind and at 30°C, the skateboards fully charged to ride at a even speed of 

20km/h on a flat surface with a load of 75kg.

SAFETY INSTRUCTIONS

1. 

In Australia, each state and territory has specific regulations that may apply to this 

product, including where you can legally use such products and if you need to register 

them with your local road traffic authority. Please be sure to familiarise yourself with 

these prior to using this product.

2.  The ESK01 electric skateboard is not a toy, should be treated with appropriate caution. 

Ensure that you use the board in a safe & appropriate environment, and always wear 

the required safety gear outline in point 3 below.

3.   

SAFETY GEAR: 

It is required that full safety gear is worn when operating this 

skateboard. An Australian standard skateboard helmet, elbow pads, knee pads, and 

gloves are all required before riding.

4.   

APPROPRIATE FOOTWEAR:

 Flipflops/Thongs/Jandals or any open toe footwear are 

not suitable when in operating this skateboard.

5.  This skateboard is designed for anyone over 10 years old. Children under the age  

of 16 must be accompanied by an adult when opperating this skateboard.

6.  This skateboard is designed to carry one rider only, it is engineered to support a 

maximum weight capacity of 100kg.

7.  The board is designed to drive on flat and paved surfaces. Avoid driving on sand, 

gravel, mud, rugged or open ground. Do not drive on slippery ground, such as snow,  

ice or oil.

8. 

Keep fingers, hairs, and clothing away from motors, wheels and any moving parts.

9.  Do not open, modify or tamper with battery housing.

Aquilia Group Pty Ltd. shall not be liable for any financial losses, physical injuries, 

accidents, legal disputes and other interest conflicts resulted from actions that violate 

the user instruction manual.

Содержание ESK01






Отзывы:

Похожие инструкции для ESK01