ESK03
5
SKATEBOARD & CONTROLLER PAIRING
CHARGER
PRODUCT OVERVIEW
2
1
3
4
5
6
7
8
9
10
12
15
11
13
14
#
ACCESSORY/PART
#
ACCESSORY/PART
1
Front Truck
9
Directional Mode (Forward/Back)
2
Battery Housing
10
Power Button
3
LED light
11
Signal Indicator
4
Charging Port
12
Skateboard Battery Indicator
5
Power Button
13
Remote Battery Indicator
6
Belt Drive Motor
14
Pair Button
7
Speed Control
15
Charging Port
8
Speed Mode (Hi/Med/Low)
Before riding the Skateboard and Remote must be paired together. Ensure both
Skateboard and Remote are turned off. Then follow the pairing procedure below.
Red Light:
Skateboard is charging
Green Light:
Skateboard is fully charged.
1. Turn on the board
2.
Press the power button for 5 seconds, then the power button light will flash.
3.
Turn on the remote, then press the pair button. The signal indicator will flash
and the power button light will flash with same frequence. Then means the two
products are paired successfully.
4. Roll the speed control forward to test the accelaration and backward to test the
brake. After tested all function work normal you can start your riding.
1
3
