2
Using locked “Performance” mode and start synchronous with music
If you need to lock all the buttons and start timeline program at exact moment of music do following:
1.
Run timeline you need
2.
Press and hold down button
for 2 seconds. You’ll see last led shines dark white:
3.
Now poi are in “Trigger” state. It means that any press of any button will start timeline from
beginning. To be exact, poi starts to run at release of any button. So you need to press and
release any button at start moment of music.
If no button is pressed within 1 hour poi automatically turns off.
4.
After poi starts all buttons are locked from accidental clicks.
To unlock buttons press and hold central button
for 2 seconds.
Charging
For charging poi just connect it to the charger or computer USB – you’ll see one red light. Its
position shows current charging level. On picture below red light is #57. It means that current
charging level is approximately 57/80 ≈ 70%.
Light will gradually moving towards to the maximum number of LED. At full charge the last LED
light turns to green:
If poi is switched off and connected to the charger poi also charges automatically.
Lithium batteries have no memory effect, so it is recommended to charge your poi without
waiting for a complete discharge. Charge after each use of poi will prolong battery life.
To see remain battery level return to select mode and press central button for 1 second. Right
before running light you see current battery level. Full scale means 100% charge, half – 50%
etc.
Avoid deep discharge of your digital poi!
Failure to do so may result in loss of battery capacity
and reduction of operating time.
