Weight adjustment
Ignis BubblePoi have an option for adjustment weight on the poi and knob.
The poi have inner channels with metal beads inside. Hook on the lower cap with a nail or something
sharp, like a little flat screwdriver, and take off the lower cap. You can see 6 channels where you can add
or remove the pellets to change the weight of the poi.
The knob has a few washers inside. Hook on the lower cap with a nail or something sharp, like a little flat
screwdriver, and take off the lower cap. Using a screwdriver of another sharp tip, remove the washers to
lessen the weight of the knob.
After 10 minutes of inaction in Standby mode, the poi automatically turns itself off. In
timeline/picture mode, the poi works until the battery is discharged. When the battery is low, the
LEDs blinks red for 10 seconds. To maintain the lifetime of the battery it’s highly recommended
to charge BubblePoi the same day.
