C o r r e c t u s e
13
MRBP.424321.001UM Version 1.0 27/01/2020
3
Correct use
3.1
Operation hints
3.1.1
EMI-SSD-1M operation must be carried out according to this UM.
3.1.2
Connection and disconnection of EMI-SSD-1M to analogue outputs as well as to digital
interface must be performed only after disconnecting power circuits.
Warning!
Manufacturer is not responsible for EMI-SSD-1M fault or for damage, resulting
from improper or not specified in this UM use of the device.
3.2
Operation limits
3.2.1
EMI-SSD-1M is not intended for operation in hazardous and corrosion environment.
3.2.2
Operating conditions:
-
ambient temperature -
10…+ 50
o
C;
-
RH < 95% w/o condensation;
-
atmospheric pressure 80-120 kPa.
3.3
Preparation
3.3.1
Working place preparation
When placing EMI SSD-1M, it is necessary to take into account safety measures, presented in
section 2.
The workplace must ensure moisture, dirt and foreign objects protection. The preparation of
the mounting seat for installing the device is carried out in accordance with the overall dimensions
shown in Fig. 2 in section 1.4.
3.3.2
Mounting
Mount EMI-SSD-1M on DIN rail as follows:
1)
install the device on the bottom part of DIN rail;
2)
with a little effort, lift the device in the vertical direction until it stops, grasping its
lower part;