IGM LAGUNA Revo 1836, Руководство по эксплуатации

Страница: 6 / 20

-6- www.igmtools.com
Pic. 18
5. Receiving your machine
5.1 Unpacking and transport
To unpack your machine you will need tin snips,
a knife, and a wrench.
1. Using the tin snips, cut the banding that is
securing the packing box (If fitted).
Extreme caution must be used, because the
banding will spring and could cause injury.
Lathe in packaging
Pic. 19
Pic. 20
Top packaging removed
Pic. 21
2. Open the box and remove the parts sent with
the lathe including the first leg.
Note: The legs are heavy and caution must be
exercised. They are cast iron and if dropped
they will break.
3. Remove the top packaging and remove the
second leg.
4. Remove the lathe bed. It is recommended
that it be lifted with a hoist or forklift using a
„sling“ as it is very heavy.
Note:
The machine is heavy. Ensure that you
have enough people to do the job safely. Do not
attempt any procedure that you feel is unsafe,
or that you do not have the physical capability
of achieving.
5. Lower the bed of the lathe onto 2 stacks of
wood. This will allow access to the underside of
the bed.
Pic. 22
5.2 Receiving the lathe
Before you unpack your new machine you will
need to first inspect the packing, invoice and
shipping documents supplied by the driver.
Insure that there is no visible damage to the
packing or the machine. You need to do this
prior to the driver leaving. All damage must be
noted on the delivery documents and signed
by you and the delivery driver. You must then
contact the seller (Laguna Tools) as soon as
practical. If damage is found after delivery,
contact the seller as soon as is practical.
Note: It is probable that you will find sawdust
within your machine. This is because the
machine has been tested prior to shipment
from the factory. It must be noted that additional
machine movement can take place between
Laguna Tools and the end user and some
adjustments may have to be undertaken by the
customer. These adjustments are covered in
the various sections of this manual.
Parts of the lathe
Supplied with:
Leg
Parts
druhá noha
Power
cord
Head stock Tool rest
Tailstock and live centre
Tool storage
Leg
Adjustable feet Leg
Banjo
Pic. 23
Second leg
Tool storage