FD300 & 600 Operating manual
Sliding stop bar right FD600
1
FD6001-08A
20
Sliding stop bar left FD600
1
FD6001-08B
21
Guide bush D15,8mm x 4mm
1
FGB158-04
22
Screw M5 x 8
2
FS200143
23
Hex key 2,5
1
F9900620
24
Hex key 4 FD300
1
FS800005
25
Hex key 5 FD600
1
FS800001
Spanner 10 for FD300
1
FS800008
68
Spanner 13 for FD600
1
FS800009
61
Sliding stop spacer upper 2 x M4 FD600
2
FD6001-16
62
Sliding stop spacer upper FD600
2
FD6001-15
63
Sliding stop spacer 2 x M4 FD600
2
FD6001-18
64
Shim 0,1mm (0,2mm) FD600
8
FS101013
65
Screw M4 x 12 FD600
4
FS200133
66
Screw M4 x 25 FD600
4
FS200132
SAFETY
•
Before changing router bit or making any kind of adjustment, always turn off and unplug your router.
•
Use protective glasses during routing.
•
Use hearing protectors.
•
Always use a dust-protection mask or respirator.
•
Use dust collection.
•
Do not wear loose clothes. Make sure that your sleeves are either rolled up or fastened and that you are not
wearing a tie.
•
Before starting your router remove all tools, nuts and other loose object from the work area.
•
Avoid an inadvertent start of your router. Before you plug it in, verify the switch is in “off“ position.
•
Before you make any adjustments, wait till your router cutter completely stops.
w w w . i g m t o o l s . c o m
IGM
Bohemia
Ltd.
Hlavni 201 - CZ 25267 Tuchomerice - PRAHA-ZAPAD - Czech republic - E.U.
Tel. #420 220 950 910 - Fax #420 220 950 911 - [email protected]
_______________________________________________________________________
© 2005 IGM Bohemia Ltd.
This document has been sent for your personal use only. All usage and reproduction is forbidden whithout written permission from IGM Bohemia Ltd.
- GB 9 -
