5
SAFETY
The device is safe to use as intended. The construction and design of the device comply with all safety regulations.
Prior to starting work, any person involved must read and be familiarised with the operating instructions. This also
applies if the person concerned has already worked on such or similar equipment or has been trained by the
manufacturer. Any person carrying out installation work must meet the health and safety requirements. This is
especially true when using personal protective equipment.
DANGER!
Danger of fatal injuries due to electric shock!
The electrical connection may only be installed by a qualified electrician.
Prior to opening the device, disconnect the system from the power supply
and prevent it from being switched on again!
WARNING!
Work on the device and its components may only be carried out by qualified specialists (heating,
refrigeration, coolant technicians and electricians).
WARNING!
Observe the safety signs on and inside the device.
WARNING!
The unit contains coolant!
If the coolant leaks, it poses risk to people
and the environment, therefore, you must:
–
turn off the system;
–
make sure the installation room is well ventilated;
–
inform the manufacturer’s customer service.
ATTENTION!
For safety reasons, never open the device unless the device is disconnect from the power supply.
ENVIRONMENTAL PROTECTION
Environmental protection
is a priority of IGLU TECH UAB. Product quality, cost-efficiency and environmental
protection are equally important to us. Therefore, we strictly adhere to environmental requirements. In order to
protect the environment and take into account financial possibilities, we use the best technologies and materials
in our production.
Packaging.
When designing packaging, we take into account the countries’ local waste recycling systems, which
ensure optimal reuse. All packaging materials are environmentally friendly and recyclable.
Disposal.
Obsolete devices contain recyclable materials. The structural elements can be easily disassembled.
The structural elements must be sorted for processing and recycling.
Glycol (antifreeze mixture) should not be discarded into the drains. Collect glycol and dispose of properly in
accordance with applicable regulations, standards and directives.
