2
11
Dear Customers,
Thank you for buying a device from our production range. We hope that
due to its advantages the product you have bought will serve you well
and for many years. Please read carefully these instructions. This
information will enable you to use the product and ensure its long-term
and reliable operation.
Our products have the safety certificate “B” as well as the approval by
the State Hygiene Inspectorate.
Contents
I. Product characteristics page 3
II. Reloading page 5
III. Assembly page 6
IV. Operation page 9
V. Maintenance page 10
Troubleshooting
In case when any problems occur during start up or normal operation it is
advised to refer to appropriate chapters of this instruction. This is to make
sure that the device is correctly operated. If the problems persist, refer to
directions below.
The cabinet does not work… Make sure if:
- The voltage and frequency are in accordance with those recommended
by the manufacturer, i.e. 230 V, 50 Hz.
- The cabinet is connected to a power source.
- The main switch and the switch at the thermostat are on.
The cabinet works, lighting is off… Make sure if:
- The lighting switch is on.
- The lamp is not burnt out.
The cabinet does not reach the required temperature, lighting is on…
Make sure if:
- The cabinet's switch is on.
- The thermostat temperature is correctly set.
- The condenser is not dirty and clean it, if necessary.
0
- The ambient temperature is not higher than +25 C. If this is the case,
the manufacturer cannot guarantee proper temperatures.
If the problems still persist please contact the local IGLOO service
giving information that can be found on the rating plate
(serial number and type etc.).
www.horepa.nl
Tel: +31 226 354535
