ELECTRICAL SAFETY
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to person or property. Read all instructions before using any appliance.
- Do not let hot water touch bare skin. Keep combustible materials such as furniture, bedding, pillows, clo-
thes, and/or paper away from the back of the unit.
- Do not operate this, or any other appliance with a damaged cord. No other appliance should be plugged
into the same outlet. Be sure that the plug is fully inserted into receptacle.
- Do not run cord over carpeting or other heat
. Do not cover the cord. Keep cord away from traffic
radiator
areas, and do not submerge in water.
- We do not recommend the use of an extension cord as it may overheat and cause a risk of fire. If you
must use an extension cord, use no. 14 AWG minimum size and rated not less than 1875 watts.
- Unplug the water dispenser before cleaning or making repairs.
- Do not plug your water dispenser into the power outlet or turn the power switches on, when the water
dispenser is empty.
- Exercise caution and use reasonnable supervision when appliance is used by or near children.
- Do not use your water dispenser outdoors. Place the water dispenser away from direct sunlight and make
sure that there is at least 4 inches of space between the back of you unit and the wall.
Keep a miminum distance of 2 inches on each side of your unit free.
UNPACKING YOUR WATER DISPENSER
1- Remove the water dispenser from the cardboard box with
out turning it upside down, or laying it on its side.
a- Remove the strapping.
b- Open the box.
4- Remove the styrofoam packing inserts from the box.
d- Pull the water dispenser straight up from the box.
e- Remove the plastic bag.
The refrigeration compressor has very sensitive mounts inside
of its welded shell in order to provide quiet running. Improper
handling may damage the compressor.
2- Wipe it clean if necessary.
3- Find a location for your cater dispenser that is protected from direct sunlight and other sources of heat.
Place the water dispenser on a level surface. Make sure that there is at least 4 inches of space between
the back of you water dispenser and the wall. Keep a minimum distance of 2 inches on each side of you
water dispenser free;
4- Do not plug your water dispenser into the power outlet yet ! Read the instructions first.
This water dispenser is for indoor use only
Room temperature shuld no exceed 97°F / 36° C.
1