REFRIGERATION LTD
6
www.igloorefrigeration.com
|
Heated Display Cases
Turn on the main switch (Figure 4/1) which activates the electric heaters
The temperature on thermostat panel is PRE-SET. (Figure 4/3)
After obtaining the desired temperature, put hot grocery products in containers and/or perforated shelf
Turn on the light switch. (Figure 4/2)
4. UNIT START UP
Temperature of the heated display space may vary. It depends on numerous factors, such as the amount and
temperature of products placed in the unit and temperature of the surroundings. The equipment should be placed
in a dry and well ventilated place.
Remarks and indications
Before placing hot products in the display case, an empty display case should
operate until the desired working temperature shall be obtained.
Do not place cold products in the unit.
Figure 3 Assembly of HDCD elements
1 – Lifted front glass
2 – Glass side
3 – Heaters screen (perforated shelf)
4 – Electric heater
5 – Water container (pulled out)
6 – Gastronomic container
7 – Display shelf made of stainless metal plate
Figure 4 Control panel
1 – Main switch (turns on/off bain-marie heaters)
2 – Lighting switch
3 – Temperature regulator knob
