Igloo Gastroline 1.5, Руководство пользователя

Страница: 14 / 36

en
14
User manual Gastroline www.igloo.pl
Fig.6 Interior of the storage chamber
1 – Ventilator of the evaporator
2 – Temperature sensor in the storage chamber
3 – Dripping pan of the evaporator
When using the display cabinet, as well as
during maintenance works it is essential to
care not to damage the temperature sensor
located in the cover of the evaporator!
It is recommended to make a break in the exploitation of the device once a month in order to clean its interior,
naturally defrost the evaporator, clean the condenser.
Do not use mechanical agents in order to fasten the defrosting process!
It is essential to keep the condenser of the device clean. Dirt
may hinder the heat exchange, causing mainly increase in elec-
tric energy consumption and may cause damage of aggregate
compressor.
In order to clean the condenser it is necessary to pull the wind
brace out of catch lifting it up. Clean condenser lamellas with
help of soft brush or paint brush. If the condenser is extremely
dirty (blocking of lamellas) it is indicated to use vacuum cleaner
or compressed nitrogen to suck / blow the dirt from between
lamellas.
The producer shall not be held responsible for damages of the condenser aggregate resulting from non-
observance of condenser cleanliness!
5. MAINTENANCE
5.1. Cleaning and maintenance
All maintenance services need to be performed after disconnecting the device from power supply!
Protect electric installation against any damage or water spillage
Do not use water stream to clean the device, only a wet cloth
Do not use any sharp objects to remove fi lth!
Devices equipped with wheels cannot be used on uneven surfaces!
Fig.7 Cleaning the condenser
1
2
3