background image

 

8

OPERATING YOUR APPLIANCE 

 

  SETTING THE TEMPERATURE CONTROL 

The temperature  control  is located  in the refrigerator section.  This  control 
will adjust the temperature for both the refrigerator and freezer sections. 

 

The  first  time  you  turn  the  unit  on,  set  the  temperature  control  to  “7”  the 
coldest. 

 

The range of the temperature controls are from position “0” or NO COOLING to “7” the coldest. After 
24 to 48 hours, adjust the temperature control to the setting that best suits your needs. The setting 
of “5” should be correct for home or office refrigerator use. 

 

NOTE: 

 

IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3 
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE 
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START. 

 

TURNING  THE  REFRIGERATOR  TEMPERATURE  CONTROL  TO  “0”  POSITION  STOPS  THE 
COOLING CYCLE BUT DOES NOT SHUT OFF THE POWER TO THE UNIT. 

 

  INTERIOR LIGHT 

When you open the door the light will be ON automatically.  When you close the door the light will 
turn OFF automatically. 
 

  DEFROSTING YOUR APPLIANCE 

 

When?:   For  the  most  efficient operation and minimum  energy  consumption, defrost  the freezer 
compartment when the frost on the appliance walls is excessive or ¼ inch thick. 
There is no need to defrost the refrigerator compartment, because ice depositing on the inner back 
wall  is  defrosted  automatically.    Ice  may  deposit  on  the  inner  back  wall  during  the  compressor 
operation; later on, when the compressor is not operating the ice will defrost and the water drops 
collect  and  drain  through  the  outlet  in  the  inner  back  wall  into  the  drain  pan  situated  above  the 
compressor, from where is evaporates. 
 

 

How?: 

CAUTION 

Do not use boiling water because it may damage the plastic parts.  In addition, never use a 
sharp  or  metallic  instrument  to  remove  frost  as  it  may  damage  the  cooling  coils  and  will 
void the warranty.  We recommend using a plastic scraper. 

 

 

Reset the thermostat to the “0” position and disconnect the power supply. 

 

Remove the frozen food from the appliance and place it in a cooler to protect the food. 

 

Leave the door open for a while so that you can easily scrap off the frost. 

 

Use a plastic scraper but be careful not to damage the inner surfaces of the freezer. 

 

Wipe up the scraped off frost and ice before it is completely defrosted. 

 

Содержание FR551












Отзывы: