5.Reversing the Door
This refrigerator has the capability of either opening the door from the left or right side. This
unit is delivered to you with the door opening from the left side. Should you desire to
reverse the direction, please follow these instructions.
Refer to the following illustration for assistance.
Note: All removed parts must be saved for reinstallation of
the door.
1.Remove the upper hinge cap (1).
2.Using a pry-tool, remove the plug buttons (5).
3.Remove the two Phillips screws (2) that connect the upper hinge (3) on the right side of the
cabinet top.
4.Carefully lift the door and place it on a padded surface to prevent scratching.
5.Remove the plug (9) and transfer it to the uncovered hole on the right side of the unit. Be
sure to press the button firmly into the hole.
6.Remove the two bolts (7) that hold the lower hinge (4) on the right side of the unit.
7.Remove the screw-type leveling front leg (8) and transfer it to the right side as shown in
the adjacent figure.
8.Set the door into it's new place making sure the pin enters the bushing at the lower frame
section (hole).
9.Secure the upper hinge (3) previously removed in step 3 on the left side of the unit. Make
sure the pin enters the bushing on the upper frame section (hole).
10.Loosely secure the lower left hinge (4) and do not tighten the bolts until the door is in the
closed position and leveled.
11.Insert the plug buttons (5) on the uncovered holes (right side).
12.Replace the upper hinge cap (1).
①
⑨
⑧
⑦
⑥
⑤
④
③
②
Plug
Leveling Front Leg
Hinge Plug(Door Frame)
Door Hinge Bolts
Short Leg
Lower Door Hinge
Upper Door Hinge
Door hinge Screws
Door Hinge Cap
①
⑨
⑧
⑥
⑤
④
③
②
⑦
5
