7
Cleaning and Maintenance
Unplug the power cord, first remove the Dust Filter. With a mild detergent and a soft brush, scrub the
honeycomb filter, clean with clear water and dry, and then replace it to the unit. (Picture 1)
After cleaning the Dust filter, remove the Honeycomb filter. With a mild detergent and a soft brush,
scrub the honeycomb filter, clean with clear water and dry, and then replace it to the unit. (Picture
2~4)
Unplug the power cord, and then remove the water tank. With a towel dipped with little detergent,
wipe away the scale in the water tank, clean with clear water, and then replace it to the unit. (Picture
5)
Clean the cover with a mild detergent and a soft cloth.
Note:
● Due to high voltage in the unit, be sure to unplug the power cord before cleaning
● No part of the control panel should contact water
Changing the Plug
This product is double insulated and so does not require an
earth.
Fit a 13A fuse in a 13A BS1363 plug. Fit the blue wire to N
and the brown wire to L. Fit the cord grip. If in doubt, call an
electrician. Don’t use a non-rewireable plug unless the fuse
cover is fitted. If you remove the plug, dispose of it.
