8
MAINS PLUG FUSE REPLACEMENT
Fuse Cover
Fuse Replacement (Class I)
This appliance must be earthed. Remove the fuse cover
with a small fl at head screw driver. Take out the fuse and
replace with a new fuse of the same Amp. Replace the
fuse cover and push back into place.
TROUBLE SHOOTING
Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot
determine the fault then please call our Customer Services number 01473 271272
Problem
Possible Cause
Solution
The appliance does
not work.
The appliance is not properly
plugged into the wall socket.
Plug the appliance in fi rmly.
The appliance is not switched on.
The heater is
getting too hot.
Make sure the appliance is switched on.
There is no electricity running
through the mains wall socket.
Block up any drafts with draft
excluders.
The room is too
hot.
The chosen setting is too high.
Check the fuse or breaker.
The chosen setting is too low.
Draft from windows or door.
Switch on an additional element.
Switch off an element switch.