8
APPLIANCE OVERVIEW
OPERATING INSTRUCTIONS
Before turning on the machine ensure that the following has been checked:
1. Check that the power cord is not damaged.
2. This product uses a 220-240V AC power supply. Before use, ensure the rated current of the power
socket meets the local requirements.
Place the machine on a flat surface. This product has a tip-over switch safety feature. If placed on an
uneven surface the heater may not turn on.
Temperature Control Knob
Insert the plug into the power socket, then turn the temperature control knob clockwise. A click sound
indicates the temperature control is on, then adjust the temperature to the desired level.
Power Selection Knob
Turn the power selection knob to select between 3 functions: Fan only, Low 1200W (LOW), High
2000W(HIGH).
Turn off the Heater
1. Turn the power selection knob to OFF position.
2. Turn the temperature control knob anticlockwise to the initial position.
3. Remove the power plug, store the heater after the entire machine has cooled down.
Safety Protection
1. Overheat protection:
When the temperature in the heater is too high (wrong environment, improper use etc.), the
thermostat device can automatically cut off the power to the unit. After the heater has cooled
sufficiently it can be used as normal after rectifying the cause.
2. Tip-over protection:
When the whole heater is tipped over, the safety system will automatically cut off the power, and will
return to the previous setting once the body is placed upright.
Temperature
control knob
Power indicator light
Power selection knob
Safety grill
