3
Before First Use
Clean the beaters in warm soapy water, rinse and dry thoroughly.
Using Your Hand Mixer
1. Insert the beaters into the socket underneath the mixer. The beaters are identical and can be inserted into
either socket.
2. Ensure that the speed selector is in the OFF position and then plug the hand mixer into the mains power outlet.
3. Turn the speed selector to your desired setting and the beaters will begin to spin.
4. The maximum operation time should not exceed 5 minutes. You should allow the mixer to cool down for a
minimum of 10 minutes between cycles.
5. When mixing is complete turn the mixer to the OFF position and unplug the power cord from the mains outlet.
Cleaning and Maintenance
•
Unplug the hand mixer from the mains power outlet and allow to cool if the housing has become warm
•
Remove the beaters from the mixer by pressing the eject button.
•
Wipe the surface of the mixer with a soft damp cloth. Do not use abrasive cleaning products.
•
You can scrap excess food particles from the beaters using a wooden or runner spatula.
•
Wash the beaters in warm soapy water, rinse and then wipe dry. The beaters are dishwasher safe.
Changing the Plug
This hand mixer must be earthed. Fit a 3A fuse in a 13A BS1363 plug. Fit the
green/yellow wire to E, the blue wire to N and the brown wire to L. Fit the cord grip. If
in doubt, call an electrician. Don’t use a non-rewireable plug unless the fuse cover is
fitted. If you remove the plug, dispose of it.
IG8700 – Hand Mixer at a Glance
