background image

4

OPERATING INSTRUCTIONS

Before first use 

Before using your hotplates for the first time, they both need to be operated for 5 minutes on the MAX 
setting. This allows the protective coating on the hotplates to bum off. This may generate some smoke 
during this period, so be sure to be in a well ventilated room when you do this. After 5 minutes turn 
temperature control dial to the MIN setting, remove the plug and allow to cool completely. Wipe any 
residue off the hotplate and housing. Your hotplate is now ready for use!

1.   Place the hotplate on a stable, flat surface out of the reach of children, ensuring that it is at least  
  10cm away from the wall on all sides. 
2.   Plug into a suitable power socket, making sure that the cable is not overstretched or could be  
  caught accidently. 
3.   The hotplates can be controlled by turning the Temperature control dials and the red lights will  
  illuminate to indicate which hotplate is switched on. 
4.   To switch on a hotplate, turn the dial in a clockwise direction so that it is between MIN for a low  
  heat and MAX for a high heat. The left dial controls the large hotplate and the right dial controls the  
  small hotplate. 
5.   To switch a hotplate off, turn either the left or right dial in an anti-clockwise direction. The dial will  
  click and the light will go out to indicate that the hotplate is turned off.

Important: Please be aware the outer body of the unit will become hot during use.

Useful tips

1.   For greater efficiency and lower running costs, use flat bottomed saucepans wherever possible  
  as this maximizes the contact between the hotplate and the saucepan. 
2.   Place the saucepan centrally onto the hotplate. 
3.   Do not use oversized saucepans as this will reduce the life of the appliance.

CLEANING AND MAINTENANCE

1.   Switch off the hotplates, disconnect from the power supply and allow them to cool  
  down completely. 
2.   Clean the hotplates with a soft damp cloth to remove any minor stains. Never use a metal  
  scouring pad as this can cause damage to the hotplate. 
3.   Never immerse any part of the hotplate, power cord or plug in water or any other liquid. 
4.   Ensure all parts of the hotplate are dry before storing away. 
5.   Chemicals, detergents or any abrasive cleaning powder, pads or polish must not be used  
  as they can damage the hotplate. 
6.   Never use any pointed or sharp objects for cleaning the hotplate.

MAINS PLUG FUSE REPLACEMENT

Fuse Replacement (Class I)

This appliance must be earthed. Remove the central screw on the plug and 
open the shell. Take out the fuse and replace with a new fuse of the same Amp. 
Install the shell again and tighten the screws.

Содержание IG8020









Отзывы: