5
Door Fitting
The freezer door can be fitted to open to either the left or the right depending on its location. The appliance
must be tilted and supported in order to carry this out. It is therefore advisable to get some help during this
procedure. Take care when fitting and tightening screws.
To change the direction, please follow these instructions.
•
Turn off the power.
•
Remove the top hinge cover, hinge screws and hinge.
•
Lift the door off the lower hinge pin.
•
Unscrew the lower hinge bracket screws and remove the lower hinge bracket.
•
Remove the adjustable foot.
•
Remove the fixed foot from the lower hinge and turn the hinge upside down. Re-fit the pin and fixed
foot. Fit the lower hinge to the other side of the freezer.
•
Remove the blanking caps which cover the fixing holes and fit them to the holes on the other side of
the freezer.
•
Support the door on the lower hinge pin. Take the hinge and locate the pin in the bush at the top of
the door. Fit the hinge to the top of the cabinet with the hinge screws. Fit the hinge cover.
•
Screw the fixed foot in to the corresponding hole on the other side of the freezer.