![background image](http://html1.mh-extra.com/html/igenix/ig2095/ig2095_instructions-for-use-manual_621682007.webp)
7
Multi Stage Cooking
Some recipes may require setting a multi-stage program involving defrosting, and different power levels. The
following example shows the steps in setting up such a program:
Example: If you want to defrost the food for 5 minutes, then to cook with 80% microwave power for 7
minutes. The steps are as follows;
1.
Press
‘W.T./TIME DEFROST’
twice, the screen will display
‘
dEF2’
2.
Turn the control dial to adjust defrost time of 5 minutes
3.
Press
‘MICROWAVE’
once
4.
Turn the control dial to choose 80% microwave power ‘
P80’
will be displayed
5.
Press
‘START/+30SEC./CONFIRM’
to confirm
6.
Turn the control dial to adjust the cooking time to 7 minutes
7.
Press
‘START/+30SEC./CONFIRM’
NOTE:
The buzzer will ring after each stage and the next stage will begin
Pre-set Function
The Pre-set function allows you to programme in a desired cooking program and set it to start at a delayed
time.
1.
Make sure that the clock has already been set. Please see
‘
Setting the Digital Clock’
instructions.
2.
Input the desired cooking program. Two stages can be set at the most. Defrost should not be set in a
preset function.
Example: If you want to cook with 80% microwave power for 7 minutes.
1.
Press
‘
MICROWAVE
’
once
2.
Turn the control dial to choose 80% microwave power until
‘P80’
is displayed
3.
Press
‘START/+30SEC./CONFIRM’
to confirm
4.
Turn the control dial to adjust the cooking time to 7 minutes
5.
After the above steps please
DO NOT
press
‘START/+30SEC./CONFIRM’
but do as follows
6.
Press
‘CLOCK/PRE-SET’
the minute figure will flash
7.
Turn the control dial to adjust the minute figure the input time will be between 0-59 minutes
8.
Press
‘START/+30SEC/CONFIRM’
to finish setting
‘:’
will light, the buzzer will ring twice when the time
arrives, then cooking will start automatically.
Child Lock
To set the lock press ‘
STOP/CLEAR’
for 3 seconds, there will be a long ‘beep’ denoting entering the child-
lock state. The screen will display the locked indicator.
To release the lock press
‘STOP/CLEAR’
for 3 seconds, there will be a long ‘beep’ denoting the lock is
released.
Auto Menu
1.
With no other setting applied, turn the control dial to the right to choose a menu between A-1 and A-8
(Please see table below of menu functions)
2.
Press
‘START/+30SEC./CONFIRM’
to confirm the menu you choose
3.
Turn the control dial to choose the food weight
4.
Press
‘START/+30SEC./CONFIRM’
to start cooking
5.
After cooking has finished, the buzzer will sound 5 times.