background image

10

•  The appliance will automatically turn off after the set time.

How to use the Timer sequence to switch the appliance ON 
and then OFF:

•  Plug the appliance into a suitable wall socket and then press the On/Off 

button once to switch the appliance to standby mode.

•  Press the Power button to switch the appliance to ‘On.’
•  Set the temperature and power levels as desired.
•  Press and hold the Timer             button for 3 seconds, release, then press 

again for a further 3 seconds; the LED display will show the letter ‘H’.

•  Use the       and       buttons to select the desired turn on time.
•  Press and hold the Timer             button for 3 seconds; the LED display will 

show the letter ‘h’.

•  Use the       and       buttons to select the desired turn off time.
•  The appliance will switch to standby mode and all 3 power lights will flash.
•  The appliance will automatically turn on after the set amount of time, and 

then run for the desired number of hours before turning off automatically.

Note: 

The appliance will give priority to the turn ON function when both are 

set.

FROST PROTECTION: 

If the appliance is switched to standby mode and the 

ambient temperature reaches below 5°C, the appliance will automatically cycle 
on and off in order to maintain a temperature of 5°C.

ECODESIGN FUNCTION: 

This appliance has an eco function for energy 

saving. If the ambient temperature is within 1°C of the desired temperature set, 
it will switch to a lower power mode to maintain the set temperature and save 
energy.

THERMAL SAFETY CUT-OUT: 

This appliance has 2 overheat protection 

devices. The first device is an overheat switch that can be reset by the user, once 
the cause of overheating has been removed and the heater has cooled down fully. 
The second device is a thermal fuse that cannot be reset by the user.
In the event that the appliance stops working as a result of overheating, take the 
following immediate steps:
•  Disconnect the appliance from the power source.
•  Remove any objects that are covering the unit.

Caution: 

Do not touch the appliance as it will be hot.

•  Leave the appliance to cool down fully.

Содержание 1G2610





















Отзывы: