C
ASE OF DAMAGE
D-09-B-62825-EN-00
Page / 21
9 Case of damage
N
OTE
Property damage caused by incorrect spare parts
Replaced spare parts that do not correspond to the characteristics of the original spare
parts may cause damage to the gauge.
•
Only use original parts from Igema GmbH for replacement.
Material damage due to insufficient or incorrect lubrication
Lubrication of components with inadequate or incompatible lubricants can lead to material
damage.
•
Ensure compatibility of lubricant and medium
•
Ensure compatibility of lubricant and operating temperature.
•
Keep spindle threads lubricated.
Property damage caused by damaged components
Apparently intact components can be damaged and lead to damage to the device when
reinstalled or reused.
•
Replace glasses and gaskets annually.
•
After loosening the clamping tabs, install completely new seals.
•
Create optimal operating conditions for the durability of the glasses and seals.
W
ARNING
Risk of injury due to leaking medium
Inflammatory, irritating and harmful substances can escape from the gauge and lead to
skin injuries and burns. This danger is also to be expected in the case of an unpressurised
cooled system.
•
Wear protective clothing including safety glasses.
•
Check the danger posed by the medium and, if necessary, wear respiratory
protection or support.
•
Observe the order of work.
•
Perform work only when the gauge is depressurized and emptied.
•
In principle, do not consider any system to be depressurised.
