Address Diagnostics
Fault Messages
International Gas Detectors
UP
DOWN
PC
P Y W
DISPLAY
V+
4-20mA
1 2 3 4 5
The Unit Base Address Can be Checked by Pressing the UP
Button for More Than 2 Seconds. Now Each Button Press either
UP or Down Will Sequentially Display Each Set Address on the
Unit.
To Exit This Mode Press Either Button For More Than 2 Seconds
In the event that the annunciator detects that it cannot communicate to its host control panel then the
following alternating message will be displayed.
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
S YS T E M S TAT U S
Estop
add=4101
al2
add=4202
keysw
add=4102
j8-t10
add=4103
al1
add=4201
j5=none
add=000
Call
service
no
comms
UP
DOWN
DOWN
DOWN
DOWN
DOWN
UP
UP
UP
UP
AL1 When Set Triggers The
Internal Sounder and Display
AL2 When Set Triggers The
Internal Sounder, Display &
Relay
This Address Reads the Digital Input
From TOC-10 Detectors
If Fitted this Address is the On-Board
Flammable Gas Detector. This Port
will Run a MK6 or MK7 Flammable
Gas Detector Directly from the Unit
<>
