4 / 4
P/N 1073041-EN • REV C • ISS 17JUN21
2. Click the
Save Configuration
button.
Resetting the switch to default
To reset the IP address to the default IP address
“192.168.0.100” and the user password to factory default mode
(default password is “admin”), press the hardware reset button
on the front panel for about 10 seconds. After the device is
rebooted, log in to the management Web interface within the
same subnet of 192.168.0.xx and default password. Note that
all the previous setups are erased after the factory default
reset.
Figure 10: Reset button
Contact information
https://firesecurityproducts.com
https://firesecurityproducts.com.au/
Legal information
Copyright
© 2021 Carrier. All rights reserved.
Specifications subject to change without prior
notice.
This document may not be copied in whole or in
part or otherwise reproduced without prior
written consent from Carrier, except where
specifically permitted under US and
international copyright law.
Trademarks and
patents
IFS names and logos are a product brand of
Aritech, a part of Carrier.
Other trade names used in this document may
be trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation
Inc.
13995 Pasteur Blvd, Palm Beach Gardens, FL
33418, USA
AUTHORIZED EU REPRENSENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Certification
2012/19/EU (WEEE directive): Products
marked with this symbol cannot be disposed of
as unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collection points. For more
information see: www.recyclethis.info.
Product
documentation
Please consult the following web link to retrieve
the electronic version of the product
documentation. The manuals are available in
several languages.
