ifs NS3562-8P-2S-V2 Скачать руководство пользователя страница 62

Страница: 62 / 359

Chapter 4: Web configuration

NS3562-8P-2S-V2 Industrial Managed Switch User Manual

Buttons

• Select the

Auto-refresh

check box to refresh the page automatically. Automatic

refresh occurs every three seconds.

• Click

Refresh

to immediately refresh the page.

• Click

Clear

to clear all statistics.

• Click

Hide

to hide the selected log entries.

• Click

Download

to download the selected log entries.

• Click

I<<

to update the system log entries, starting from the first available entry ID.

• Click

to update the system log entries, ending at the last entry currently

displayed.

• Click

to update the system log entries, starting from the last entry currently

displayed.

• Click

>>I

to update the system log entries, ending at the last available entry ID.

Detailed log

The Detailed System Log Information page displays the industrial managed switch
system log information details.

The page includes the following fields:

Object

Description

The ID (>= 1) of the system log entry.

Message

The message of the system log entry.

Buttons

• Click

Download

to download the system log entry to the current entry ID.

• Click

Refresh

to update the system log entry to the current entry ID.

• Click

I<<

to update the system log entries, starting from the first available entry ID.

Содержание NS3562-8P-2S-V2








































































































































































































































































































































































Результаты поиска

Содержание NS3562-8P-2S-V2

Отзывы:

ifs NS3562-8P-2S-V2, Руководство пользователя, Страница: 62 / 359

Результаты поиска

Содержание NS3562-8P-2S-V2

Отзывы: