ifs MC352-4P-2S-V2 Скачать руководство пользователя страница 2

Copyright 

 

© 2022 Carrier. All rights reserved. Specifications subject to change without 

prior notice.  
This document may not be copied in whole or in part or otherwise 

reproduced without prior written consent from Carrier, except where 

specifically permitted under US and international copyright law. 

Trademarks and 

patents 

 

IFS

 names and logos are a product brand of Aritech, a part of Carrier. 

Other trade names used in this document may be trademarks or registered 

trademarks of the manufacturers or vendors of the respective products. 

Manufacturer 

 

PLACED ON THE MARKET BY:

 

Carrier Fire & Security Americas Corporation Inc.

 

13995 Pasteur Blvd, Palm Beac

h Gardens, FL 33418, USA

 

AUTHORIZED EU REPRENSENTATIVE:

 

Carrier Fire & Security B.V.

 

Kelvinstraat 7, 6003 DH Weert, Netherlands

 

FCC compliance  

Class A

: This equipment has been tested and found to comply with the 

limits for a Class A digital device, pursu

ant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in 

which case the user will be required 

to correct the interference at his own 

expense. 

FCC conditions  

This device complies with Part 15 of the FCC Rules. Operation is subject to 

the following two conditions: 

 

(1) This device may not cause harmful interference. 
(2) This Device must accept any interference received, including 

interference that may cause undesired operation.

 

ACMA compliance 

 

Notice! 

This is a Class A product. In a domestic environment this product 

may cause radio interference in which case the user may be required to 

take adequate measures.

 

Product warnings and 

disclaimers 

 

 

THESE 

PRODUCTS ARE INTENDED FOR SALE TO AND 

INSTALLATION BY QUALIFIED PROFESSIONALS. CARRIER FIRE & 

SECURITY CANNOT PROVIDE ANY ASSURANCE THAT ANY PERSON 

OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY “AUTHORIZED 

DEALER” OR “AUTHORIZED RESELLER”, IS PROPERLY TRAINED OR 

EXPERIENCED TO CORRECTLY INSTALL FIRE AND SECURITY 

RELATED PRODUCTS.

 

For more information on warranty disclaimers and product safety 

information, please check https://firesecurityproducts.com/policy/product

-

warning/ or scan the following code:

 

Certification 

 

  

  

   

   

 

EU directives 

 

This product and - if applicable - the supplied accessories too are marked 

with "CE" and comply therefore with the applicable harmonized European 

standards listed under the EMC Directive 2014/30/EU, the RoHS Direc

tive 

2011/65/EU.

 

Содержание MC352-4P-2S-V2




















Отзывы: