MC352-4P-2S-V2 User Manual
9
Switch Upper Panel
The upper
panel of the Industrial Gigabit
PoE+ Switch
consists of one terminal block
connector within two DC power inputs.
Figure
3 shows the upper
panel of the Industrial
Gigabit PoE+ Switch
.
Figure 3: Industrial Gigabit PoE Switch Upper Panel
Wiring the Power Inputs
The six-contact terminal block connector on the top panel of
Industrial Gigabit PoE+
Switch is used for two redundant power inputs. Please follow the steps below to insert
the power wire.
Caution: When p
erforming any of the procedures like inserting the wires or tightening
the wire-clamp screws, make sure
the power is OFF to prevent
from getting an electric
shock.
To insert the power wire:
1.
Insert positive
and
negative DC power wires into contacts 1 and 2 for POWER 1, or
contacts
5 and 6 for
POWER 2.
V1+
V1-
V2+
V2-
2. Tighten the wire-clamp screws for preventing the wires from loosening.
