Ifor Williams Trailers TT2012, Руководство пользователя

Страница: 38 / 55

Page | 38
•
The Wheel Chock sideplates have multiple 10.5 mm diameter mounting holes. Only two holes
in each plate will align with two holes in a particular chassis. The other holes line up on other
TB models. Only 2 x M10 bolts are needed to secure teach plate.
4.6 – Fitting and Using CT177 Ski-Jump Kit
The Ski-Jump kit provides a means of loading the towing vehicle by driving over the trailer.
It comprises a pair of short ramps that bolt to the front of the main bead pressings, two additional
skids that “lock on” to the short ramps – thereby preventing accidental disengagement when the
transported car is well above the ground – and a special winch bracket that folds down to clear the
underside of the transported car.
When using the ski-jump option the
jockey wheel must be lowered out of
the way or removed altogether.
Not every towing vehicle will work with
a ski-jump equipped trailer, towing
vehicles with low bed heights being
those likely to fail.
The ski-jump skids, when not in use
stow between the main bed pressings
or, if the centre deck option is fitted, on
top of the centre deck pressings.
When using the ski-jump option the
trailer is partially tilted and then
hydraulically locked in position.
The skids which, as noted above, lock in place, can only be slid onto and off of the ramps from the
side.