ZZ1102 I/O module
4
4 Items supplied
●
1x CR0403 BasicController, pre-programmed
The BasicController is delivered pre-programmed� If ordered separately, the BasicController is not
pre-programmed�
●
1x EC0401 cover with cable seal for BasicController
●
1x E3M171 CAN/power adapter cable to connect the BasicController to the O3M 3D sensor
● 1x EC9206 connection cable with contact housing for BasicController (inputs)
● 2x EC9207 connection cable with contact housing for BasicController (outputs)
●
1 x instructions for set-up
5 Function
The BasicController included in the set is supplied with voltage and connected to the O3M 3D sensor via
the CAN/power adapter cable�
The O3M 3D sensor communicates with the BasicController via the CAN bus
The BasicController CR0403 translates the data of the O3M 3D sensor on the inputs and output pins�
A
B
C
D
E
F
N2
P/N1
LED
CAN
IN
OUT
PWR
Fig� 1: Overview
