QHA200
11
u
Click on [Enter] to change the entry from [yes] to [no].
u
Select [I) Set the IP address].
w
[Network (ip)] opens.
u
Enter the new IP address using the keyboard and select [<Ok>].
w
[Network configuration] opens.
Now the settings must also be made for the network mask, gateway and the DNS servers. Once
all settings have been made, they must be permanently saved.
u
Select [S) Save the configuration].
w
The message [The network configuration was successfully changed] is displayed.
u
Confirm the message with [<OK>].
u
Select [R) Return to the previous menu] several times to return to the [Main menu].
w
The system is configured and available via web interface.
7.3.3 Set-up completed
u
Select [X) Exit].
w
The [Main menu] is closed.
The following systems are available via the web browser:
•
Opening the appliance management system
•
moneo (
7.4 Opening the appliance management system
7.4.1 Requirements
Device (e.g. PC) for connection to the moneo|appliance. This device must be connected to the same
network as the Ethernet interface (ETH 2) of the moneo|appliance.
For access to the appliance management system, a suitable web browser must be installed on the
user’s own PC.
Documentation of the serial number (product label) on the side of the housing (
It is recommended to use one of the following browsers:
•
Google Chrome
•
Mozilla Firefox
7.4.2 Initial login via the browser
u
Open the URL of the appliance management system in your browser.
http://<IP or hostname>/ams
w
General status information is displayed.
u
Click on the symbol
.
u
Log in as administrator using the below login data.
u
Enter the login details and confirm with [Login].
w
Prompt to change the password appears.
User name:
administrator
password:
<serial number of moneo|appliance>
GB